Ogi3 Platform / Liquid Control Module
Liquid Control Module
Let your cultures flow.
Programmatically and automatically add and remove liquids to/from your culture flasks to perform precisely controlled and/or continuous cultures.
The module can also be controlled directly through the User Scripting feature.
One module, more ways to culture.
The Ogi3 Liquid Control module enables the following experiments and processes to be performed in a 15 mL Ogi3 culture:
pH Control
Continuous culturing
Fed-batch culturing
Inoculation
Product Specifications
Operating temperature: 0-40 °C
Minimum dispensing volume: 30 μL
Tubing: 8 pieces of 85 cm, 1 mm ID, 3 mm OD, Innovaprene P60
Tubing Compatibility: Aqueous media, buffers, dilute acids/bases
Max flow rate (input pumps):†, †† 3 ml/min
Max flow rate (output pumps):†, †† 5 ml/min
Long-term flow rate variation*: <5% initial rate
Priming volume: 0.67 ml per pump
Module dimentions (WxHxD): 29 x 9 x 30 cm
Module weight: 2.1kg
Pump lifetime: >2000 hours
* Measured after 11 weeks; pumps operating 50% of the time
† When using 1 mm ID pump tubing and low-viscosity media. Flow rates will differ if using pump tubing of different internal diameters.
†† Maximum continuous flow rates. Pumps be only on or off; the flow rate cannot be varied continuously. The minimum ON time for the pumps is 0.3 second. When running any of the liquid control experiments, the software automatically adjusts on/off times to achieve the required average flow rates.
What's in the box?
Each Ogi3 Liquid Control Module is supplied with:
KIT-0304
Liquid control tubing set
KIT-0303
Media Waste Stopper set
KIT-0312
Spill Guard set
KIT-0304
4x Y-Connectors
Resources
Liquid Control Model Specifications
Innovaprene Chemical Compatability Guide
Liquid Control Tube Cleaning protocol
