Ogi3 Platform  /  Liquid Control Module

Liquid Control Module

Let your cultures flow.

Programmatically and automatically add and remove liquids to/from your culture flasks to perform precisely controlled and/or continuous cultures.

The module can also be controlled directly through the User Scripting feature.

One module, more ways to culture.

The Ogi3 Liquid Control module enables the following experiments and processes to be performed in a 15 mL Ogi3 culture:

pH Control

Continuous culturing

Fed-batch culturing

Inoculation

Product Specifications

Operating temperature: 0-40 °C

Minimum dispensing volume: 30 μL

Tubing: 8 pieces of 85 cm, 1 mm ID, 3 mm OD, Innovaprene P60

Tubing Compatibility: Aqueous media, buffers, dilute acids/bases

Max flow rate (input pumps):†, †† 3 ml/min

Max flow rate (output pumps):†, †† 5 ml/min

 

Long-term flow rate variation*: <5% initial rate

Priming volume: 0.67 ml per pump

Module dimentions (WxHxD): 29 x 9 x 30 cm

Module weight: 2.1kg

Pump lifetime: >2000 hours

* Measured after 11 weeks; pumps operating 50% of the time

† When using 1 mm ID pump tubing and low-viscosity media.  Flow rates will differ if using pump tubing of different internal diameters.

†† Maximum continuous flow rates. Pumps be only on or off; the flow rate cannot be varied continuously. The minimum ON time for the pumps is 0.3 second. When running any of the liquid control experiments, the software automatically adjusts on/off times to achieve the required average flow rates.

What's in the box?

Each Ogi3 Liquid Control Module is supplied with:

One culture flask connected to a source bottle of broth media and an empty waste flask through liquid control pump clips disconnected from device.

KIT-0304

Liquid control tubing set

A source/drain stopper without a sterility filter.

KIT-0303

Media Waste Stopper set

Left-hand-side spill guard in black silicone.

KIT-0312

Spill Guard set

One culture flask connected to a source bottle of broth media and an empty waste flask through liquid control pump clips disconnected from device.

KIT-0304

4x Y-Connectors

Resources

Liquid Control Model Specifications

 

Innovaprene Chemical Compatability Guide

 

Liquid Control Tube Cleaning protocol

 

Want to find out how Ogi3 can help your productivity soar?